Cleaning bathroom tiles and the grout lines between them doesn’t have to be a daunting task. With a few simple ingredients and tools you likely already have at home, you can restore your bathroom tiles to their original shine. Here are five effective methods to tackle dirt, mold, and lime deposits in grout lines.

---

1. Use Vinegar

Vinegar is a natural cleaner that works wonders on mold and mineral deposits.

• Pour a cup of vinegar into a spray bottle.

• Spray it directly onto the affected areas, especially where there is mold or lime buildup.

• Let it sit for about one hour.

• Afterward, gently scrub the tiles with a brush and rinse thoroughly with water.

Important: Do not mix vinegar with bleach or other chemical cleaners, as this can create harmful fumes.

Extra tip: If vinegar alone doesn’t remove stubborn stains, sprinkle a little salt over the area before spraying vinegar. Lightly scrub with a brush—the combination helps lift dirt and deposits more effectively.

---

2. Use Ammonia

Ammonia is a powerful cleaning agent that can effectively tackle tough stains on tiles.

• Mix ¼ cup of ammonia with water.

• Apply the solution to the dirty grout or tiles.

• Scrub several times with a brush until mold and grime are removed.

• Rinse thoroughly with clean water.

Safety note: Always wear gloves when using ammonia to protect your hands.

---

3. Use Baking Soda

Baking soda is a gentle, natural cleaner that can remove dirt and mold from grout lines.

• Mix baking soda and water in a 1:1 ratio to form a paste.

• Apply the paste to the grout lines and leave it for a few minutes.

• Scrub vigorously with a brush to lift stains and mold.

• Rinse well with water.

Enhanced method: For extra cleaning power, combine baking soda with lemon juice:

• Mix ½ cup baking soda with ½ cup lemon juice (or vinegar) and a small amount of water.

• Use a sponge to apply the solution to tiles, focusing on grout lines.

• Let it sit for at least 5 minutes before scrubbing and rinsing.

This method not only removes grime but also leaves your tiles smelling fresh.

---

4. Use Hydrogen Peroxide

Hydrogen peroxide, also known as “oxy,” is an effective stain remover for tiles and grout.

• Apply borax powder to the tile surface or grout lines first and leave for at least 5 hours.

• Pour hydrogen peroxide over the borax-treated areas and let it sit for another 2 hours.

• Scrub with a brush and rinse with warm water.

This method helps restore the tiles’ shine and effectively removes stubborn stains and mold buildup.

---

5. Use Specialized Tile Cleaners

For heavily stained, discolored, or moldy tiles, you may need commercial tile cleaners. Products such as VG-205, Dyma Scale, or VG 205 are formulated to remove tough stains and restore the original look of your tiles.

Safety tips when using chemical cleaners:

• Read the instructions carefully before use.

• Always wear gloves and a mask to protect your skin and lungs.

• Ensure proper ventilation while cleaning.

Commercial cleaners can be very effective, but using natural remedies first is often safer and more environmentally friendly.

---

With these five simple methods, you can tackle dirt, mold, and lime deposits in your bathroom grout and tiles. Whether you choose natural ingredients like vinegar, baking soda, and lemon, or specialized cleaning products, your bathroom can look bright, fresh, and sparkling again with minimal effort.