After a period of use, showerheads often get clogged due to mineral deposits sticking inside, causing uneven water flow. To fix this issue, you can apply the simple tips below.

If you pay attention, you’ll notice that after some time, the water output from the showerhead gradually decreases and the flow becomes weaker. This happens because some of the tiny holes on the showerhead surface become blocked, preventing water from coming out and causing discomfort when showering.

A clogged showerhead may be caused by water containing high levels of calcium. If the showerhead is not cleaned for a long period, mineral deposits and dirt will accumulate and block the water outlet holes. All you need to do is clean off these deposits to solve the problem.

---

Using Toothpaste

Toothpaste is primarily used to clean and protect teeth, but it also contains certain cleaning agents. You can make use of this common household item to clean various surfaces, including showerheads.

Wet the showerhead, then apply a small amount of toothpaste to its surface. Use a brush to scrub thoroughly, especially in areas with stubborn stains. Finally, turn on the water to rinse away all the dirt.

---

Using White Vinegar

White vinegar is a basic kitchen ingredient, and thanks to its acidic nature, it is also effective for removing stains and killing bacteria.

To clean a showerhead with vinegar, first remove the showerhead. This is simple—just hold the showerhead and twist the connector underneath to detach it.

Place the showerhead in a plastic bag and pour white vinegar along the pipe until the entire showerhead surface is submerged. Tie the bag securely and soak the showerhead for at least one hour.

Next, prepare a needle or a small toothpick and use it to poke through each hole on the showerhead. The acid in vinegar helps dissolve mineral deposits, making them easier to remove. Poking through the holes helps push out any remaining buildup.

Finally, rinse the showerhead thoroughly with clean water and reinstall it. Turn on the water to check the result.

If you cannot remove the showerhead, simply place a plastic bag filled with vinegar around the head and secure it so that the entire showerhead is submerged.

---

You can also combine both methods for better results — soak the showerhead in vinegar first, then scrub it with a brush and toothpaste while using a needle or toothpick to clear out any remaining blockages.

Additionally, it’s recommended to clean your showerhead regularly to prevent mineral buildup, which can make cleaning more difficult over time and create an environment for bacteria and mold to grow.