In modern families, the shower is a very familiar device. If during use you find the shower head is weak, do not rush to replace it, do it this way, it will be very useful. The water from the shower head flows slowly and weakly, which will surely make you feel uncomfortable when using it. The reason may be that the water pressure in the pipe is too weak and not enough to push the water out. If the water is still flowing strongly but after a period of use suddenly becomes weak, it is very likely that you have forgotten to clean it or cleaned it properly.

Many people think that the shower head is clean because water always flows through it. However, in fact, the shower head can still rust and oxidize after a period of use. This causes the water jet hole to narrow, the water flowing out is light yellow due to dirt. It is both uncomfortable and affects the user's health.

Therefore, cleaning the shower head is very important. To clean the shower, you can follow one of the tips below.

Clean the shower with white vinegar

White vinegar is probably a spice that almost every house has. In addition to being used in cooking, white vinegar is also used as a safe and effective detergent and cleaner. There are two ways to clean the shower with white vinegar.

Method 1:

First, put white vinegar in about 2/3 of a plastic bag and tie it tightly to the shower head. Leave it like that for a few hours or overnight, then remove the vinegar bag and turn on the faucet with strong pressure to push the dirt out.

Next, use a soft brush to scrub away any remaining stains on the outside. Finally, rinse again until the stains are completely gone.

Method 2:

With this method, you completely remove the shower head and place it in a plastic basin containing vinegar to soak overnight. Next, take the shower head and wash it with water.

Then, use a brush to remove any stains on the surface and use a soft towel to wipe it clean. The final step is to put the shower head back in place, turn on the water to flush out the dirt inside.

Clean the shower head with baking soda

To increase the effectiveness, you can mix vinegar with baking soda. The simple way is to put vinegar in a bottle, add 1/2 cup of baking soda, mix the mixture well and pour it into a plastic bag.

Then tie the plastic bag tightly to the shower head to soak overnight. Next, use a brush to clean the small holes on the shower head surface, use a shower towel and rinse with water to remove dirt.

Clean the shower head with lemon juice and vinegar

Another way to clean the shower head is to mix vinegar and lemon juice. Mix 3 tablespoons of lemon juice with 300ml of vinegar in a bag, tie the bag tightly to the shower head. Then leave the mixture for a few hours before using a brush to scrub away the dirt on the outside. Finally, turn on the water to remove dirt.

Clean the shower with detergent

You can buy a specialized detergent and clean the shower according to the product instructions. This method is also simple and inexpensive.

To keep the shower clean, you should clean it regularly. Using a metal shower head will be easier to clean and contain less bacteria than a plastic shower head.