To clean the tiles and the gaps between the tiles, you can use those materials that are available in the house. Let's find out how to do it.

Use vinegar

Pour a cup of vinegar into a mist spray. Then, spray vinegar directly on the areas contaminated with mold and limescale and leave it like that for an hour

Then, use a brush to scrub the surface of the tiles once and drain the water thoroughly.

Note, do not mix vinegar with any bleach to avoid health hazards.

In the event that vinegar cannot remove the stains, you can use additional salt. Sprinkle salt on top of the area to be cleaned and spray with vinegar. Gently scrub the residue with a brush.

Use of ammonia

Ammonia can help you clean stains on bathroom tiles. Mix 1/4 cup of ammonia with water. Apply this mixture to the area to be cleaned and then use a brush to scrub it several times to remove the residue and mold. Drain the water to remove any deposits.

During cleaning, wear gloves to protect the skin of your hands.

Using baking soda

Mix baking soda with water in a 1:1 ratio. Apply the mixture to the slots of the tiles and leave it on for a few minutes. Use a vigorous scrub brush to remove dirt and mold. Use water to rinse off any deposits.

To increase the effect, you can combine baking soda and lemon juice.

Mix 1/2 cup of baking soda with 1/2 cup of lemon juice (or you can substitute with vinegar) with 1/2 small basin of water. Use a sponge to soak up this solution on the bathroom tiles, especially the groove between the tiles. Leave it on for at least 5 minutes. Then, use a brush to scrub vigorously to remove the stains and rinse with clean water.

Use of hydrogen peroxide

Hydrogen peroxide is also known as peroxide. This is a substance with good cleaning ability, you can use it to clean stains on objects in the house.

To clean the stains on the tiles, you need to use hydrogen peroxide and soldering powder. First, apply solder powder to the surface of the tile to be cleaned, leave it like that for at least 5 hours. Then, pour hydrogen peroxide into the places where the solder powder has been applied and leave for at least 2 hours. Then, use a brush and warm water to rinse off all the residue. By doing so, the bathroom tiles will shine again.

Use a specialized detergent

When the squash tiles are yellowed, unevenly colored or have black spots and mold, you can use specialized cleaning chemicals for ceramic tiles sold on the market such as VG-205, Dyma Scale, VG 205... These chemicals will ensure maximum removal of stains and mold.

When buying chemicals, you need to read the instructions carefully before using them. During cleaning, wear gloves and a mask to protect yourself.